ZyXEL Communications GS-3012F Series User Manual
Page 228
Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
228
password
<password>
Change the password for
Enable mode.
14
policy
<name> classifier
<classifier-list>
<[vlan<vlan-id>]
[egress-port
<port-num>]
[priority <0-7>]
[dscp <0-63>]
[tos <0-7>]
[bandwidth
<bandwidth>]
[outgoing-packet-
format
<tagged|untagged>]
[out-of-profile-
dscp <0-63>]
[forward-action
<drop|forward>]
[queue-action
<prio-set|prio-
queue|prio-
replace-tos>]
[diffserv-action
<diff-set-
tos|diff-replace-
priority |diff-
set-dscp>]
[outgoing-mirror]
[outgoing-eport]
[outgoing-non-
unicast-eport ]
[outgoing-set-
vlan] [metering]
[out-of-profile-
action <[change-
dscp][drop][
forward] [set-
drop-prec]>]
[inactive]>
Configures a policy.
A
classifier distinguishes traffic
into flows based on the
configured criteria. A policy
rule ensures that a traffic flow
gets the requested treatment
in the network.
13
port-access-
authenticator
Enables 802.1x
authentication on the switch.
13
<port-list>
Enables 802.1x
authentication on the
specified port(s).
13
<port-list>
reauthenticate
Sets a subscriber to
periodically re-enter his or
her username and password
to stay connected to a
specified port.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE