ZyXEL Communications GS-3012F Series User Manual
Page 224
Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
224
mac-forward
name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Configures a static MAC
address forwarding rule.
13
name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
inactive
Disables a static MAC
address forwarding rule.
13
mirror-port
Enables port mirroring.
13
<port-num>
Sets a monitor port (the port
to which traffic is copied for
analysis).
13
mode zynos
Changes the CLI mode to the
ZyNOS format.
13
mrstp <tree-
index>
Activates the specified STP
configuration.
13
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-
30>
Sets Hello Time, Maximum
Age and Forward Delay to
the specifed tree.
13
priority <0-61440>
Sets the priority of the switch
to the specified tree.
13
mrstp
interface
<port-list>
Activates MRSTP on the
specified ports.
13
path-cost <1-
65535>
Sets a path cost to the
specified ports.
13
priority <0-255>
Sets the priority value to the
specified ports for STP.
13
tree-index <1-2>
Assigns a specific STP
configuration to the ports.
13
multi-login
Enables multi-login.
14
mvr <vlan-id>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See
13
no
13
bandwidth-control
Disables bandwidth control.
13
bcp-transparency
Disables bridging control
protocols such as STP.
13
classifier
<name>
Disables the classifier. Each
classifier has one rule.
If you disable a classifier you
cannot use policy rule related
information.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE