ZyXEL Communications GS-3012F Series User Manual
Page 223
Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
223
unknown-multicast-
frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
interface
port-channel
<port-list>
Enables a port or a list of
ports for configuration. See
for more details.
13
ip
address
<ip> <mask>
Sets the IP address and
subnet mask of the out-of-
band management port.
13
address default-
gateway
<ip>
Sets the default gateway’s IP
address for the out-of-band
management port.
13
name-server
<ip>
Sets the IP address of a
domain name server.
13
route
<ip> <mask>
<next-hop-ip>
Creates a static route.
13
<ip> <mask>
<next-hop-ip>
[metric
<metric>] [name
<name>]
[inactive]
Sets the metric of a static
route or deactivates a static
route.
13
lacp
Enables Link Aggregation
Control Protocol (LACP).
13
system-priority
<1-65535>
Sets the priority of an active
port using LACP.
13
loginPreceden
ce
<LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the
switch should use (first) to
authenticate a user.
14
logins username
<name>
password <pwd>
Configures up to four read-
only login accounts.
14
username <name>
privilege <0-14>
Sets the access privilege for
the existing login accounts.
The higher the value, the
more commands are allowed.
14
logout
Exits the CLI.
13
mac-aging-
time
<10-3000>
Sets learned MAC aging
time.
13
mac-filter
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
Configures a static MAC
address port filtering rule.
13
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
inactive
Disables a static MAC
address port filtering rule.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE