Initial setup example, 1 overview, 1 creating a vlan – ZyXEL Communications GS-3012F Series User Manual
Page 61: Chapter 5 initial setup example, Figure 25 initial setup network example: vlan, Initial setup example (61)
Advertising
GS-3012/GS-3012F User’s Guide
61
C
H A P T E R
5
Initial Setup Example
This chapter shows how to set up the switch for an example network.
5.1 Overview
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the switch IP management address
5.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can
do this with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 25 Initial Setup Network Example: VLAN
Advertising