Xerox 721P85600 - Manual (Page 29)

LPS OPTIONS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE 2-5
Input enablement device
Adding feeders to your DocuPrint 96/DocuPrint 96MX LPS is made
possible by the input enablement device option. Located on the right
side of the feeder/stacker, it allows your DocuPrint 96/DocuPrint
96MX LPS to support and interface directly with feeders. Figure 2-2
points to the location of the input enablement device.
Printer Configurations
The DocuPrint 96/DocuPrint 96MX LPS is available in the following
configurations:
1. Printer + Inverter Feeder/Stacker
2. Printer + Inverter Feeder/Stacker + Bypass Transport
3. Printer + Inverter Feeder Stacker + Feeder Stacker
4. Printer + Inverter Feeder Stacker + Feeder Stacker + Bypass
Transport
Each of these configurations can have the Input enablement device
option.
Refer to the “Printer options” section earlier in this chapter for
information about each of the options above.
Figures 2-3 through 2-6 illustrate each of the four printer
configurations available.
Figure 2-3. Printer + Inverter Feeder/Stacker
Figure 2-4. Printer + Inverter Feeder/Stacker + Bypass
Transport