Xerox 721P85600 - Manual (Page 44)

PREINSTALLATION
3-14 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE
Note: These turning figures are based on the following inverter/
feeder/stacker dimensions: 28 inches/711 mm by 42 inches/1067
mm.
Table 3-3. Turning radius for printer (separated and upended
on dolly)
Passage or doorway A width Minimum passage B width
29 inches/737 mm 49 inches/1245 mm
30 inches/762 mm 43 inches/64.5 1092 mm
31 inches/787 mm 41 inches/1041 mm
32 inches/813 mm 37.5 inches/953 mm
34 inches/864 mm 35 inches/851 mm
36 inches/914 mm 32 inches/813 mm
38 inches/965 mm 31 inches/787 mm
Table 3-4. Turning radius for inverter Feeder/Stacker module
Passage or doorway A width Minimum passage B width
29 inches/737 mm 43 inches/1092 mm
30 inches/762 mm 41 inches/1041 mm
31 inches/787 mm 40 inches/1016 mm
32 inches/813 mm 38 inches/965 mm
33 inches/838 mm 37 inches/940 mm
34 inches/864 mm 36 inches/914 mm
35 inches/889 mm 35 inches/889 mm
36 inches/914 mm 34 inches/864 mm
37 inches/940 mm 33 inches/838 mm
38 inches/965 mm 32 inches/813 mm
39 inches/991 mm 31 inches/787 mm
40 inches/1016 mm 31 inches/787 mm
41 inches/1041 mm 30 inches/762 mm
42 inches/1067 mm 29 inches/737 mm
43 inches/1092 mm 29 inches/737 mm