Z Microsystems 14 - Manual (Page 16)

Doc# 27-0001UM Issued 7/99 Rev. 1.2
Monitor Adjustments
MENU DESCRIPTIONS
H-SIZE Select this control, then use the
and buttons to expand or
decrease the image width to horizon-
tally fill the display screen.
Select this control, then use the
and buttons to choose from:
English, German (Deutsch), Spanish
(Espanol), Italian (Italiano) or French
(Francais).
Select this control, then use the
and
buttons to individually adjust
R, G or B color.
Select this control, then use the
and buttons, which allows
adjustment of the natural color tone.
Select this control, then use the ENTER
button
to select in which direction
to move the OSD menu. Use the
and buttons to move the OSD
menu.
This function requires the 3.5” diskette
provided with the Command Console.
When the Auto Calibration program
diskette is used, select this menu using
the ENTER button , then use the
and buttons to the setting “ON”.
When the 640x480 or 720x400
displays are displayed, select this
menu using the ENTER button, then
use the and buttons to set
“ON” or “OFF”.
If the menu is operated, then the
current mode’s settings are all erased
and returned to the factory settings.
LANGUAGE
COLOR CONTROL
GAMMA
MOVE OSD
AUTO CALIBRATION
CALIBRATION
VGA GRAPHICS
RECALL
16