Z Microsystems 14 - Manual (Page 18)

Doc# 27-0001UM Issued 7/99 Rev. 1.2
Reference
LED INDICATOR
The Power Management feature of the
LCD monitor is comprised of three
stages:
1. On (green)
2. Standby, Suspend or Active Off
(amber/green)
3. Out of Range (amber)
TIMING GUIDE The monitor is a multi-frequency
monitor. It operates at horizontal
frequencies between 31.25KHz and
60.24KHZ, vertical frequencies
between 56Hz and 75Hz. Because of
its microprocessor-based design, it
offers auto-synchronization and auto-
sizing capabilities. The monitor offers
15 pre-programmed settings that are
listed in the following table.
These preset modes cover most of the
common video modes supported by
popular graphics adapters. However,
each adapter’s implementation of
these video modes may vary slightly in
timing. If it is necessary to make
minor display adjustments (horizontal
and vertical position and horizontal
position), refer to the On-Screen
Display section of this manual for
instructions.
18