Z Microsystems 14 - Manual (Page 17)

Doc# 27-0001UM Issued 7/99 Rev. 1.2
AUTO CALIBRATION PROGRAM
This program cooperates with FPMC
firmware which automatically adjusts
and saves the panel settings, which
will fit each support mode. It takes
about 50 seconds for auto adjust-
ment.
Follow these steps to start the Auto
Calibration Program:
1. Insert the Auto Calibration diskette
into the 3.5” disk driver.
2. Drag the Auto Calibration file to
the Windows background on the
computer.
3. Set “ON” the Auto Calibration in
the OSD menu.
4. Select taskbar properties with Auto
Hide in the Windows OS.
5. Double click the Auto Calibration
icon in the background.
NOTE: In order to make it work
correctly, first set “ON” in
the OSD menu of the AUTO
CALIBRATION item.
Monitor Adjustments
17