Zebra 105SL - Manual (Page 113)

105 PC and Memory Cards
PCMCIA PC Cards
6/30/06 105SL User Guide 11342L-001 Rev. A
2. Insert the PCMCIA card into the card slot with the notch up. Insert it far enough to make
the card-eject button pop out.
3. Reinstall the card shield over the PCMCIA card and card slot.
The printer is ready to operate with the additional memory, font option, or wireless
capability. To be sure that a memory or font card has successfully initialized, print a
configuration label as instructed in
Print a Configuration Label on page 77 , and review it
to see if the new card information is listed. For wireless cards, follow the instructions in
Print a Network Configuration Label on page 78 .
Note • The PCMCIA card may take a few minutes to initialize. The PAUSE light flashes
while the card initializes. If the card is already initialized, the PAUSE light flashes only
once or twice after the card is installed.