Pause self test, Pause self – Zebra 105SL User Manual

Page 141

Advertising
background image

133

Troubleshooting

Printer Diagnostics

6/30/06

105SL User Guide

11342L-001 Rev. A

PAUSE Self Test

This self test can be used to provide the test labels required when making adjustments to the
printer’s mechanical assemblies or to determine if any printhead elements are not working.

Figure 35

shows a sample printout.

To perform a PAUSE self test, complete these steps:

1.

Turn off (

O

) the printer.

2.

Press and hold

PAUSE

while turning on (

I

) the printer. Hold

PAUSE

until the first control

panel light turns off.

The initial self test prints 15 labels at the printer’s slowest speed, and then
automatically pauses the printer. Each time

PAUSE

is pressed, an additional 15 labels

print.

Figure 35

shows a sample of the labels.

Figure 35 • PAUSE Test Label

While the printer is paused, pressing

CANCEL

alters the self test. Each time

PAUSE

is

pressed, 15 labels print at 6 in. (152 mm) per second.

While the printer is paused, pressing

CANCEL

again alters the self test a second time.

Each time

PAUSE

is pressed, 50 labels print at the printer’s slowest speed

While the printer is paused, pressing

CANCEL

again alters the self test a third time.

Each time

PAUSE

is pressed, 50 labels print at 6 in. (152 mm) per second.

While the printer is paused, pressing

CANCEL

again alters the self test a fourth time.

Each time

PAUSE

is pressed, 15 labels print at the printer’s maximum speed.

To exit this self test at any time, press and hold

CANCEL

.

Advertising