Before you begin – Zebra 105SL User Manual

Page 24

Advertising
background image

Printer Setup
Before You Begin

16

11342L-001 Rev. A

105SL User Guide

6/30/06

Before You Begin

Review this checklist, and resolve any issues before you set up or use your printer.

‰ Unpack and Inspect the Printer Have you unpacked the printer and inspected it for

damage? If you have not, see Unpack and Inspect the Printer

on page 17

.

‰ Select a Site Have you selected an appropriate location for the printer? If you have not,

see

Select a Site for the Printer on page 18

.

‰ Attach a Power Cord Do you have the correct power cord for your printer? If you are

unsure, see

Power Cord Specifications on page 24

. To attach the power cord and connect

the printer to a power source, see

Connect the Printer to a Power Source on page 23

.

‰ Connect to a Data Source Have you determined how the printer will connect to a

data source (usually a computer)? For more information, see

Select a Communication

Interface on page 19

.

‰ Select Media Do you have the correct media for your application? If you are unsure,

see

Types of Media on page 25

.

‰ Select Ribbon Do you need to use ribbon, and is the appropriate ribbon available, if

needed? If you are unsure, see

Ribbon Overview on page 27

.

Advertising