Zebra 105SL - Manual (Page 63)

55 Operations
Load Media in Rewind Mode
6/30/06 105SL User Guide 11342L-001 Rev. A
15. Push the printhead assembly down (
1
), and then rotate the printhead-open lever clockwise
until it locks into place (
2
).
Remove Labels from the Rewind Spindle
Rewind mode uses a core to wind printed labels. Remove the core with the printed labels every
time you change labels for the Rewind option to work correctly.
To remove media liner from the rewind spindle, complete these steps:
1. Have the labels run out?
1 2
Important • It is not necessary to turn off the power to remove printed labels. If power is
turned off, all label formats and images, as well as any temporarily saved parameter settings
stored in the printer’s internal memory, are lost. When power is turned back on, these items
must be reloaded.
If... Then...
Yes Slide the core from the rewind spindle.