Remove used ribbon – Zebra 105SL User Manual

Page 73

Advertising
background image

65

Operations

Load Ribbon

6/30/06

105SL User Guide

11342L-001 Rev. A

Remove Used Ribbon

Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.

To remove used ribbon, complete these steps:

1.

If the ribbon has not run out, cut or break it before the ribbon take-up spindle.

2.

Push the hook until it slips out of the groove in the ribbon take-up spindle. Move the hook
back and forth to loosen the ribbon.

3.

Remove the loosened hook from the ribbon take-up spindle.

4.

Slide the used ribbon off of the ribbon take-up spindle and discard.

Advertising