Xerox MAX 200 - Manual (Page 141)

Finishing touch screen features 139
Stamper (continued)
Stamp pattern
Introduction
The stamp pattern feature allows you:
•
To select a loaded stamp pattern.
•
To load all the stamp patterns from the floppy disk drive to
machine memory. Ensure your floppy is formatted. For detailed
information on how to format your floppy, refer to page 245.
•
To print all the stored stamp patterns.
•
To delete all the stamp patterns, from machine memory.
Procedure
1. Select the finishing feature group tab. If needed, refer to page
129.
2. Select the stamper button, on the finishing screen.
The stamper screen is displayed.
3. Select on.
4. Select stamp pattern.
The stamp pattern screen is displayed.
Select Stamp number from
Stamp pattern screen Selected
01
Stamper Cancel Done
Stamp Color
On
Off
Stamp
Location
Stamp
Pattern
Date Stamp
Numbering
No. ?? No Print
Auto No Print Red