Xerox MAX 200 - Manual (Page 219)

How to customize the MAX 200 217
How to change the copy features (continued)
Lead/trail edge default for synchronized
(continued)
5. Use the arrow buttons to set the desired lead and trail edge
dimension. The
±±±±
100 buttons, increase or decrease the
dimension by 100. Select the clear button, to clear wrong data.
A margin value can be set in 1 mm increments from – 90 mm to
+ 999 mm. A minus margin value cuts the copy media shorter
than the document.
6. Select done to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select cancel.
7. To exit, press the custom presets button.
Custom Presets
Lead/ Trail Edge
Default for Synchro Cancel Done
Set Default
Lead/Trail
Margins for
Synchronized
Cutting +100
-100
+100
-100
mm(-90~+999)
mm(-90~+999)