Xerox MAX 200 - Manual (Page 160)

158 Finishing touch screen features
Stamper (continued)
Stamp color
Introduction
The stamp color feature sets up the color of the stamp to print red
or black.
Procedure
1. Select the finishing feature group tab. If needed, refer to page
129.
2. Select the stamper button, on the finishing screen.
The stamper screen is displayed.
3. Select on.
4. Select stamp color.
The stamp color screen is displayed.
5. Select red or black.
6. Select done to return to the stamper screen.
Select Stamp number from
Stamp pattern screen Selected 01
Stamper Cancel Done
Stamp Color
On
Off
Stamp
Location
Stamp
Pattern
Date Stamp
Numbering
No. ?? No Print
Auto No Print Red
Ready to Copy
Load documents face down Selected 01
Stamp Color Cancel Done
Black Red