Xerox MAX 200 - Manual (Page 72)

70 Basic touch screen features
R/E; media; cut
Introduction
When the R/E; media cut mode screen is displayed the following
manual mode features are available to you:
•
Manual 100% - copy at 100%
•
Manual R/E – reduce or enlarge your copies using normal R/E,
R/E by L&W, or R/E calculate. These features allow you to
reduce or enlarge copies from 25 to 400%.
•
Cut roll media – use one of the cut modes; standard,
synchronized, long copy or variable length
•
Manual feed tray – enables the manual feed tray mode, refer to
64.
Option Function
Normal R/E One of six preset percentages may be selected, or any percentage
within the available range may be entered. Refer to page 71.
R/E by L&W Two percentages may be selected, one for the length and one for
the width. Refer to page 73.
R/E calculator The percentage is automatically calculated based on the document
and copy size. There are two calculators available, one for normal
R/E and one for R/E by L&W (for manual mode).
•
To refer to the normal R/E calculator, refer to page 75.
•
To refer to the R/E by L&W calculator, refer to page 77.
Paper length adjustment The paper length adjustment feature has four cut options; standard,
synchronized, long copy and variable length. Refer to page 79.
Manual feed Select the manual feed button when you need to use the manual
feed tray. For detailed information on how make copies from the
manual feed tray, refer to page 70.
Ready to copy
Load documents face down Selected 01
Normal R/E
R/E; Media; Cut Cancel Done
100.0%
R/E by L&W
100.0%
36” Bond
24” Bond
24” Bond
18” Vellum
12”x18” Bond
Paper Length
Adjustment
Manual Feed
Synchronized