Xerox MAX 200 - Manual (Page 146)

144 Finishing touch screen features
Stamper (continued)
Numbering (continued)
Sequential
Note: The sequential option is available only when the E-sorter
collated option is selected.
Note: To cancel changes and exit from any screen, select cancel on
the touch screen.
Procedure
1. Select the finishing feature group tab. If needed, refer to page
129.
2. Select the stamper button, on the finishing screen.
The stamper screen is displayed.
3. Select on.
4. Select numbering.
The numbering screen is displayed.
5. Select print.
6. Select sequential number.
7. Select enter alphanumeric.
The alphanumeric screen is displayed.
Select Stamp number from
Stamp pattern screen Selected
01
Stamper Cancel Done
Stamp Color
On
Off
Stamp
Location
Stamp
Pattern
Date Stamp
Numbering
No. ?? No Print
Auto No Print Red
Ready to Copy
Load documents face down Selected 01
Numbering Cancel Done
Enter
Alphanumeric
No Print
Print
Fixed Number
Sequential
Number
Each stack has same
number
Numbering Plan