Xerox MAX 200 - Manual (Page 203)

How to customize the MAX 200 201
How to change the copy features (continued)
Date stamp format
Introduction
The date stamp format feature sets up the default format for the
date stamp. The date stamp is printed as 14 point Gothic, and can
not be changed.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the date stamp format feature.
4. Select open.
The date stamp format screen is displayed.
5. Select the desired year format, yyyy, ‘yy, yy.
Press [Custom Presets] to return to
Previous screen.
Reduce/Enlarge Presets
Media Type and Width for Auto Mode
Stamp Location and Orientation
Date Stamp Format
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document Orientation
Lead/Trail Edge Default Synchro
System features Copy features
Storage/Disk
Manager
Open
Date Stamp Format Cancel
Done
Year Month Zero
Suppress Symbol
2000 03.14
yyyy ‘yy
yy
mm
abc
on
off
- /
. ,