Z Microsystems StarGate 20 - Manual (Page 17)

Doc# 27-0027UM Rev 1.0 Issued 10/04
17
The unit will detect
as many PIPs as are
available. If no PIPs are
installed on the system,
the sub-menu will not be
displayed.
Highlight “PIP Select 1”.
The RGB and Video PIP
menus offer similar adjust-
ment options. The following
sections describe the vari-
ous RGB and Video menu
options.
NOTE: Before adjusting the Geometry, Color Balance,
or Image Quality of a PIP screen, the desired
PIP needs to be enabled. See the section titled,
“To Enable PIPs” for the proper initialization
procedure.

KVM Control (see KVM on screen on previous page):
Toggles ON/OFF to apply or remove preset KVM com-
mand features. The preset commands are programmed
as alternate functions of the fi rmware buttons on the front
of the panel. For predefi ning the KVM character strains,
please refer to SoftMenu instructions regarding KVM
Control.
NOTE: When the KVM
Control is
turned ON,
the Main
Menu requires
the button be
held down for
extended length
of time to be
made active.
RGB/Video PIP Control Screens
OPERATIONS