Installation, Shipment contents, Required tools – Z Microsystems StarGate 20 User Manual

Page 6

Advertising
background image

Doc# 27-0027UM Rev 1.0 Issued 10/04

6

Required Tools

• Phillips screwdriver

NOTE: For the fastest and easiest

installation of the StarGate,
follow these steps in the
sequence they are presented.

Preparations

In preparation to install the StarGate, take
the following precautionary steps:

Verify the StarGate power switch is OFF.

Do not connect or disconnect the unit dur-
ing an electrical storm.

The power cord plug must be connected to
a properly grounded power outlet.

Any equipment to which the unit will be at-
tached must also be connected to properly
wired and grounded power outlets.

Ensure all of the following parts are in-
cluded in the package received from Z Mi-
crosystems. Verify all parts have not been
damaged during shipment. If any of the
parts are missing or damaged, immediately
contact Z Microsystems Customer Service
at 858-657-1000.

• StarGate unit attached to

the mounting plate

• Power Cable

• User Manual

• Video Cable

• Serial Cable

• Rack-mounting hardware

• ELO Software CD for

optional Touch Screen (user
manual on CD)

Remember to save the unit’s original
shipping materials. It may be necessary to
move the unit at a later date.

SHIPMENT CONTENTS

INSTALLATION

Advertising