Z Microsystems StarGate 20 - Manual (Page 9)

Doc# 27-0027UM Rev 1.0 Issued 10/04
9
The display protective lens is intended to protect the surface of the screen from damage
while in transit or during storage. The protective lens is not intended to be used while the
StarGate is in operation, but can be used to protect the display if desired.
Make sure the StarGate is
in the closed position.
Move the protective lens
release catch (located
above the display) up.
While holding up the
release catch, slide the
protective lens to the left
or right. Slide the protective lens
off the edge of the display.
To reinstall the display pro-
tector during long storage
or shipping, just reverse
this process.
INSTALLATION