Z Microsystems StarGate 20 - Manual (Page 7)

Doc# 27-0027UM Rev 1.0 Issued 10/04
7
HARDWARE INSTALLATION
INSTALLATION
The StarGate is a fl at LCD
that mounts on the front
of the RETMA rails of a
standard 19” rack.
The dual locks can be
seen on the vertical handle
to the left. The display
controls are located on the
bottom below the display.
On the center left side of
the back is the receptacle
for the power plug for the
cord that leads from the
power supply to the dis-
play, as well as the video
connector and host serial
connector.
The StarGate display
swings out to the right.
The bracket that mounts
to the front of the RETMA
rails is on the left.
On the top and bottom of
the mounting bracket is
the receptacle for securing
the display fl at against the
rack.
Using both hands, press
and slide the lock releases
inside the handle on the
left side of the display
towards each other to
release the locks and allow
you to swing open the
StarGate.