Appendix, Ntsc pip – Z Microsystems StarGate 20 User Manual

Page 59

Advertising
background image

Doc# 27-0027UM Rev 1.0 Issued 10/04

59

APPENDIX

Description
PVP adjusts the vertical position of the RGB PIP.

Argument
The allowable range is 0-600 base10. The position of the PIP is based on a relative loca-
tion system. Every two display pixels is equal to “1” relative location increment. The origin
(0,0) is the upper-left hand corner of the display, with 800,0 being the upper-right, 0,600 is
the lower-left, and 800,600 being the lower-right. Taking into account the 2:1 ratio a value
of 300 will place the RGB PIP’s upper-left hand corner at the half way point vertically on
the display.

NTSC PIP

The following commands are those that act on the NTSC PIPs contained in the display
confi guration.

PCK

Description
PCK toggles the chroma key feature ON/OFF.

Argument
Provide a “1” for ON and a “0” for OFF.

PDS

Description
PDS has the display place all of the NTSC picture-in-picture settings back to the factory
defaults.

Argument
No arguments.

PHB

Description
PHB sets the upper-bound of the blue portion of the RGB value used for chroma key. The
upper-bound of the color is determined by taking the color value that is desired (0-255)
and adding a guardband value to take into account accuracy limitations of the hardware.
The upper-bound limit is still 255 even with the guardband.

Argument
The allowable range is 0-255 base10. The default value is dependent on which one of the
PIPs being addressed. There are currently four chroma key colors used as default colors
they are the following:

default for PIP 1 = Cyan (R:0,G:255,B:255)

default for PIP 2 = Magenta (R:255,G:0,B:255)

default for PIP 3 = Chartreuse (R:135,G:255,B:0)

Advertising