Z Microsystems ZX Station - Manual (Page 15)

Document# 27-0007UM Issued 11/00 Rev. 1.0
15
Operation
TRANZPAK 6
FRONT PANEL
The front panel of the TranzPak 6
contains three LEDs, a SCSI ID
indicator, a push-switch to set the
SCSI ID and a function switch.
The top LED indicates power to the
hard disk drive. The middle LED
indicates an active state when the
computer is accessing the TranzPak 6.
The bottom LED indicates a read only
state.
The SCSI ID Indicator shows a
number, which is the setting for the
disk module.
The SCSI ID Set Switch is a push-to-
set switch that advances the SCSI ID
Indicator by one number with each
push.
The Function Switch has four
positions.