Z Microsystems ZX Station - Manual (Page 23)

Document# 27-0007UM Issued 11/00 Rev. 1.0
Operation
23
NOTE: Refer to the TranzPak 6 User
Manual for details about
system operations.
CARRYING THE DISK MODULE
The handle can be used to carry the
disk module. No special precau-
tions are needed.
INSTALLING YOUR OWN HARD DISK DRIVE
Refer to the TranzPak 6 User Manual
for detailed instructions on installing
your own hard disk drive into the ZX
Station.
Subjects covered include:
• Open the Module
• Remove the Shock Mounts
• Install the Shock Mounts Onto Disk
Drive
• Install the SCSI ID Harness Onto
Disk Drive
• Install the DC Power Harness Onto
Disk Drive
• Install the SCSI Interface Harness
Onto Disk Drive
• Mount the Disk Drive in Disk
Module
• Reinstall SCSI ID Harness in Disk
Module
• Secure Harness Cables in Disk
Module
• Install Disk Module Cover