Zhone Technologies 4000E - Manual (Page 15)

Subscriber Lines
IPD4-A2-ZZ40-20 4000E IP Broadband Loop Carrier Installation Instructions 15
4 Pull the hook-and-loop fastener strap upward, making sure that it is snug
against the connector, then pull the strap back down, such that the
hook-and-loop fastener layers stick to one another across the top of the
connector.
5 Tuck the tab at the end of the strap down between the connector frames so
that it is out of the way of other connections.
6 Screw the right side of the RJ21 cable connector into the jack screw on
the right side of the RJ21 connector frame on the chassis. Note: If you are
using a 120 or 180 degree cable, both the right and left sides of the cable
connector should be screwed to the RJ21 connector frame on the chassis.
05-17842
05-17843
05-17844