Zhone Technologies 4000E - Manual (Page 6)

6 4000E IP Broadband Loop Carrier Installation Instructions IPD4-A2-ZZ40-20
Installation Options
The 4000E BLC is designed for installation in a Restricted Access area where
admittance is limited to trained and authorized service personel. It may be
installed on a tabletop or in a rack.
Installation on a Tabletop
Insert the four provided rubber bumper screws into the mounting holes at the
bottom of the 4000E chassis for surface grip and airflow. Position and secure
all connecting cables such that they will not become a tripping hazard or pull
loose from the chassis. Ensure that the air supply vents around the top and
bottom edges of the chassis are not blocked.
Front Rear
Side Top
4000E Bottom View
Rubber Bumper
Screw
05-17825