3M M150 - Manual (Page 17)

Chapter 2 Setting Up Your M150 FPD Monitor
3M Touch Systems Proprietary Information
17
Arm Mounting Option
The unit has the 100mm VESA mounting pattern on the back case to allow
for arm mount capability. Follow the manufacturer's instructions included
with the mounting device to properly attach your monitor.
In order to arm-mount the M150 FPD, you will need to remove the monitor
face from the back stand and back yoke.
Figure 1 Disassembling the Yoke & Base for Arm Mounting
Step 1 -- Unlock the yoke. With the unit laying face
down safely and securely on a nonabrasive surface,
remove the two screws connecting the top of the
yoke. Lift yoke and pull down to disengage tabs to
remove.
Step 2 -- Remove the bottom two screws holding
the hinge cover in place. Remove the small hinge
cover.
Step 3 -- Remove the inner four screws holding the
base to the FPD, unplug the speaker jack (if
present), and gently remove the base.