3M M150 - Manual (Page 5)

3M Touch Systems Proprietary Information
Overview
Welcome to the world of 3M Touch Systems — a world where using a
computer is as simple as touching the screen. This guide describes how to
set up your M150 Flat-Panel Display (FPD) touch monitor.
This document assumes you have basic computer skills. You should know
how to use the mouse and keyboard, choose commands from menus, open
and run application programs, and save files.
Important Safety Information
Read and understand all safety information before using this product.
Follow all instructions marked on the product and described in this
document. Pay close attention to the following installation warnings and
safety precautions.
Intended Use
The M150 flat-panel display (FPD) touch monitor was designed for
touch input and tested to replace an existing monitor. These
monitors are intended for indoor use only and are not designed for
use in hazardous locations.
DANGER
To avoid the risk of fire and/or explosion which will result in
serious injury or death:
• Do not install or use this product in a hazardous location.