3M M150 - Manual (Page 31)

Chapter 3 Video Display Options
3M Touch Systems Proprietary Information
31
Adjust this setting so that either the vertical bars of noise are replaced by an
even amount of noise across the whole screen, or the noise disappears
completely.
If you do an Auto Config, the monitor will try to find the best Clock/Phase
setting. If you are not satisfied with the auto adjustment, fine-tune the phase
manually as described above.
Miscellaneous Menu
The Miscellaneous Menu contains three options: Reset, OSD Position, and
System info.
• Reset is used to reload all factory default parameters.
• OSD position is used to setup the OSD menu position – horizontal and vertical
position is adjusted separately. Each position item will bring up the slider
window – the maximum value of the sliders are based on the size of the OSD
menu.
• System Info is used to provide detailed information regarding the current input
resolution/frequencies and firmware version.
Note: The OSD will timeout after 45 seconds of inactivity and will not save any new
settings.
Lock Out Feature
Once you have fine-tuned your display, you may want to restrict users from
inadvertently making changes. In order to do this, follow this simple
procedure. Repeat the procedure to restore access.
1. Press SELECT and then press the ◄/left arrow key. Hold both keys for 10
seconds. DO NOT RELEASE.
2. Then press the ►/right arrow key and hold all three keys together for an
additional 10 seconds.