3M M150 - Manual (Page 24)

24 M150 FPD Monitor Installation Guide
3M Touch Systems Proprietary Information
To test that the monitor is working properly:
1. Turn on your computer.
2. Make sure the video image is displayed. If it is not, turn on your monitor.
3. Make sure the video image is centered within the screen area. Use the monitor
controls to adjust the image, if necessary.
You can adjust the horizontal and vertical position, contrast, and brightness
to better suit your video card and your personal preference. Refer to
Chapter 3 for more information on using the on-screen menu to adjust the
video display.
Installing TouchWare Software
TouchWare software includes the touch screen driver and control panel that
enables your touch screen to work with your computer. When you install
the CD included with your monitor, TouchWare will automatically load the
correct driver for your system. 3M Touch Systems currently supports touch
screen drivers for the following PC operating systems:
• Windows XP
• Windows 2000
• Windows NT 4.0
• Windows 9x
• Windows Me
These drivers and relevant technical documentation, can be found on the
latest 3M Touch Systems CD (19-640) and are also available for download
from our website at
www.3Mtouch.com . After the software is installed,
restart your computer to load and activate the touch screen driver. To
complete the setup of your touch monitor, make sure you calibrate the touch
screen.
Power switch Volume Audio Jacks Microphone