3M M150 - Manual (Page 28)

28 M150 FPD Monitor Installation Guide
3M Touch Systems Proprietary Information
Pressing MENU will pull up the On Screen Display (OSD) menu, as shown
below.
Figure 9 M150 Main Menu Options
Auto Bright Contrast Color Position Image Misc
Config
Auto Config
To perform an Auto Config, press the ◄/left arrow key once then press
SELECT. The Main Menu item Auto Config is used to adjust the
configuration of the phase clock vertical and horizontal position
automatically. A confirmation box is displayed to confirm the user
selection. The default selection in the box is NO and is highlighted by a red
bar.
If the Select key is pressed, the main menu is redisplayed and nothing is
changed. When “Yes” is selected an automatic configuration is started.
After the process is completed successfully, a confirmation box “Does this
image look correct?” is displayed. If image is correct, select “Yes” to exit
confirmation box. If image isn’t correct, select “No” to go to PHASE item
adjustment and adjust the phase manually to the best image quality.
If you change your display to Windows shut down mode, this noise will be
more visible, and easier to eliminate. Click on the "Start" button and then
click Shut Down. This will bring you to the Windows shutdown mode.
After finishing phase adjustment, click on the "Cancel” to return to your
original Windows display.