Olympus IPLEX UltraLite - Manual (Page 22)

18
3 Pre-observation/pre-operation preparation and inspection
Optical
adapter Any dirt or water on the inner or outer of the objective lens
surfaces or the inner electrodes?
Using the optical adapter inner surface electrodes while
dirt or water is present can damage the optical adapter
or the distal end.
Failure to clean electrodes properly can result in
illumination failure.
See "6 Storage
and
maintenance"
(P. 33)
Make sure there are no deformities or foreign objects in
the threads of the screws of the optical adapter.
Note that insufficient cleaning can result in a loss of
water tightness between the optical adapter and the
distal end.
Any looseness in optical adapter components?
Never use the optical adapter if any components are
loose. Otherwise, a loose part might fall into the
inspection object.
LCD monitor Any surface cracks or other abnormalities?
NOTE
The LCD monitor is manufactured based on precision
technologies. The LCD monitor may contain pixels that do
not light (visible as black dots) or light permanently (visible
as bright dots). This does not indicate a defect or
malfunction of the product.
Replacement
required.
Contact
Olympus.
Any fingerprints on the screen or other soiling? See "6 Storage
and
maintenance"
(P. 33).
Inspection
location
Item If abnormality is
discovered