Olympus IPLEX UltraLite - Manual (Page 39)

35
6 Storage and maintenance
Cleaning the LCD monitor
LCD monitor viewing problems due to fingerprints and dirt
Wipe the LCD monitor with a soft cloth dampened with clean water. Next, lightly wipe it with a
clean, dry cloth.
CAUTION
• Never use a chemically treated cloth or strong detergent, such as benzine or alcohol. Doing so may
damage the surface of the LCD monitor.
• Do not use a cloth that is hard, dirty, or has foreign matter on it. Doing so may damage the surface of the
LCD monitor.
Cleaning the main unit
Dirty main unit
Wipe the main unit with a soft cloth dampened with clean water. Next, lightly wipe it with a clean,
dry cloth. Also wipe all dirt, water, and other foreign matter from the battery cover, SD card cover,
and the inside of the AC adapter connector.
CAUTION
• Do not rinse the instrument with running water. Otherwise, the equipment may be damaged.
6.4 Storage precautions
Store this product under normal room temperature and humidity.
CAUTION
• Never subject cables to severe bending, pulling, binding, twisting, or crushing forces. Do not allow a cable
to be exposed to heat, which can melt its covering. Otherwise, cable might be damaged, which can lead to
fire and electric shock.
1
Turn off power and remove the battery or unplug the AC adapter.
2
Unlock the angulation lock and straighten the angulation section, then store it
according to the label with packing instructions.
3
Store the equipment on a level surface in a clean, dry and stable place.