Edimax Technology EW-7228APn - Manual (Page 15)

15
3. The setup wizard will search for the access point. When it has successfully
found the device, click “Next” to continue.
4. The setup wizard will prompt you for a password. Enter the default
password, 1234.
5. The setup wizard will then show the access point’s IP information. The
default IP is 192.168.2.1. Click “Next” to continue.
Note: Please do not select “Automatically assign an
IP address from your network” unless you are
performing more advanced setup. For first-time
installation, please use the default IP address.