Edimax Technology EW-7228APn - Manual (Page 63)

63
III-8. Configuration Tool
The access point’s configuration tool enables you to back
up the current settings, restore the settings to a
previously backed up version or reset the access point
back to its original factory settings.
Backup Settings Click “Save” to save the current settings on
your computer as a .bin file. The default
filename is config.bin.
Restore Settings Click the browse button to locate a
previously saved configuration file and then
click “Upload” to upload the file and replace
your current settings.
Restore to
Factory Defaults Click “Reset” to restore settings to the
factory default. A pop-up window will
appear and ask you to confirm and enter
your log in details. Enter your username and
password and click “Ok”. See below for
more information.
Note: Restoring settings to the factory
default will restore all settings,
configurations and passwords back to the
factory default.
Note: You can also reset the device to the
factory default by pressing and holding the