Edimax Technology EW-7228APn - Manual (Page 65)

65
Please wait for the upgrade to complete. When it is complete, you will see the
following message.
Refresh your browser to return to the “Status and Information” homepage of
the browser based configuration device.
III-10. Reset
If the access point malfunctions or is not responding,
then it is recommended that you reset the device. This
feature is useful if the location of the access point is not
convenient.
To reset the access point, click “Reset” in the menu on
the left side of the browser based configuration
interface and the following screen will be displayed.
Note: If the access point is still not responding
after a reset, then switch off the device by
disconnecting the power supply and wait for
10 seconds before reconnecting the power.
Note: Resetting the device will not affect the
current settings and configuration.