Edimax Technology EW-7228APn - Manual (Page 35)

35
When you select AP Mode, the following appears:
Band Please select the wireless band you wish to
use. By selecting different band settings,
you’ll be able to allow or deny wireless
clients using certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
2.4GHz (G), only wireless clients using the
wireless band you select (802.11b, 802.11n,
or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only
wireless clients using the 802.11b and
802.11g bands will be able to connect to
this access point.
If you want to allow 802.11b, 802.11g, and
802.11n clients to connect to this access
point, select 2.4GHz (B+G+N).
MAIN ESSID Please input the ESSID (the name used to
identify this wireless access point) here. You
can input up to 32 alphanumerical
characters. Please note that the ESSID is
case sensitive.
Channel
Number Please select a channel number you wish to
use. If you know a certain channel number
is being used by other wireless access points
nearby, please refrain
from using the same
channel number
Associated Click the “Show Active Clients” button and a