Edimax Technology EW-7228APn - Manual (Page 52)

52
III-5-1. Disable
When you select “Disable”, wireless encryption for the network is disabled.
This means anyone who knows the device’s SSID can connect to it, and is not
recommended.
Enable 802.1x
Authentication Check this box to enable 802.1x user
authentication. See
III-5-2. 802.1x
Authentication.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-5-2. Enable 802.1x Authentication
If you select “Disable” or “WEP” as your encryption type, you can enable
802.1x authentication based on a RADIUS user authentication server. Check
the “Enable 802.1x Authentication” box to activate it.