Edimax Technology EW-7228APn - Manual (Page 36)

36
Clients new window will appear, which contains
information about all wireless clients
connected to this access point. You can click
the “Refresh” button in the popup window
to keep the information up-to-date.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-2-2. Station Infrastructure Mode
In Station-Infrastructure mode, the device acts as a wireless client and can be
connected to Ethernet-only Internet devices, such as smart televisions or
video game consoles. This gives these devices the capability to connect to the
Internet wirelessly.
Band Please select the wireless band you wish to
use. By selecting different band settings,
you’ll be able to allow or deny access points
using certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
2.4GHz (G), only access points using the