Edimax Technology EW-7228APn - Manual (Page 48)

48
Code client you wish to connect, and click the
“Start PIN” button. The “WLAN” LED on the
access point will stay on while this access
point waits for incoming WPS requests.
Note: When using PBC-type WPS setup,
you must press the hardware or software
WPS button on the wireless client within
120 seconds. If you do not do so in time,
you will need to activate WPS on the access
point again.
III-4. Advanced Setting
In “Advanced Setting” you can configure the advanced
features of the access point. Please do not modify these
settings unless you know what effect the changes will
have on your access point; advanced settings are for
experienced users only.
Note: Changing these settings can adversely
affect the performance of your access point.