Edimax Technology EW-7228APn - Manual (Page 55)

55
Enable 802.1x
Authentication Check this box to enable 802.1x user
authentication. See III-5-2. Enable 802.1x
Authentication.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-5-4. WPA Pre-Shared Key
WPA pre-shared key is the recommended and most secure encryption type.
WPA Unicast
Cipher Suite Available options are: WPA (TKIP), WPA2
(AES), and WPA2 Mixed. AES is safer than
TKIP, but not all wireless client support it.
Please make sure your wireless client
supports the cipher you selected.
We recommend WPA2(AES). If your
wireless device does not support AES, then
select WPA2 Mixed.
Pre-shared Key
Format Please select the format of the pre-shared
key here, available options are “Passphrase”
(8 to 63 alphanumerical characters) and
“Hex (64 characters)” – 0 to 9 and a to f.