Petzl SEQUOIA SWING - Manual (Page 3)

3 C69SFA SEQUOIA SWING C695050D (080610)
3 4
5
Inspection, points to verify Compatibility
Harness preparation and pre-adjustment
Before each use
Check the webbing at the attachment points, at the adjustment
buckles and at the safety stitching.
Look for cuts in the webbing, wear and damage due to
use, to heat, and to contact with chemical products, etc. Be
particularly careful to check for cut threads.
Check that the rigid seat rapid adjustment system is locked.
Verify that the FAST buckles operate properly.
Check the GATED RINGS: body, spacer, screw securely
tightened.
During each use
It is important to regularly inspect the condition of the
product. Make sure that all pieces of equipment are properly
connected and positioned with respect to each other.
Consult the details of the inspection procedure to be carried
out for each item of PPE on the Web at www.petzl.com/ppe
or on the PETZL PPE CD-ROM. Contact a PETZL distributor if
there is any doubt about the condition of this product.
Verify that this product is
compatible with the other
elements of the system in your
application (compatible = good
functional interaction).
An incompatible connection can
cause accidental disconnection,
breakage, or affect the safety
function of another piece of
equipment.
The SEQUOIA SWING provides many
adjustments. Here are some tips for
how to adapt this harness to your
applications or techniques.
5
Harness preparation and pre-adjustment
5A. Adjust the seat
width
Sit on a table, measure your
seated width and adjust
the width of the rigid seat.
Add 6 cm to your seat
measurement (for example,
if you measure 40 cm,
adjust the rigid seat to
46 cm).
We recommend that the
two extensions be adjusted
symmetrically. A difference
of one single hole is
authorized.