En + drawings, How to put on and adjust the harness – Petzl SEQUOIA SWING User Manual

Page 5

Advertising
background image

5

C69SFA SEQUOIA SWING C695050D (080610)

6

How to put on and adjust the harness

6A. Putting on the

harness

Open the FAST buckles

on the leg straps.

Open up the harness

(untwisting the straps if

necessary) and holding

it by the belt, slip it on

over your legs and pull

it up to your waist.

6

How to put on and adjust the harness

Fast

Fast

Clic !

6B. Adjust the

thigh straps

Fasten the FAST

buckles. Check for

correct locking.

Adjust the sizing

a bit loose; if too

tight, it will be

uncomfortable.

Fast

Fasten the FAST

buckle on the belt.

Check for correct

locking. Tighten

the waistbelt

well. Stow the

excess webbing

neatly using the

strap retainers

(fl at against the

waistbelt).

6C. Adjust the DoubleBack buckles for the seat height

- Very tight adjustment with the DoubleBack buckles (9) touching the

thigh padding: most of your weight is on your backside, with slight lumbar

support.

You will have a tendency to keep yourself upright because the support

from the belt is too far back.

- Looser adjustment with several centimeters between the buckle and the

seat: your weight is distributed better between the backside and the lumbar

region, your body is tilted further back.

6D. Adjust the rear straps

These elastic straps allow adjustment of the

distance between the rear of the seat and the

rear of the belt.

- Adjustment is too loose: the seat hits your

legs when walking.

- Tight adjustment: the seat slides up under

the buttocks, staying out of the way when

you are moving about.

Test your adjustments in suspension on

each attachment point to be sure that your

harness is correctly sized and provides

adequate comfort.

DoubleBack

Advertising