Starting the engine – FIAT Grande Punto Actual User Manual

Page 113

Advertising
background image

112

SAFETY

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

SER

VICE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

CONTROLS AND DEVICES

ST

AR

TING

AND DRIVING

STARTING THE ENGINE

The car is fitted with an electronic engine
lock device: if the engine fails to start, see
the paragraph on “The Fiat CODE sys-
tem” in the “Dashboard and controls”
section.

The engine may be noisier during the first
few seconds of operation, particularly af-
ter a long period of inactivity. This is a fea-
ture of hydraulic tappets, the timing sys-
tem chosen to reduce the number of
servicing interventions, and effects neither
functionality nor reliability.

We recommend that during
the initial period you do not
drive to full car performance
(e.g. excessive acceleration,

long journeys at top speed, sharp brak-
ing etc.).

When the engine is switched
off, never leave the key in
the ignition switch to prevent
draining the battery.

It is dangerous to have the
engine running indoors. The

engine consumes oxygen and pro-
duces carbon dioxide, carbon monox-
ide and other toxic gases.

WARNING

Remember that the brake
booster and power steering

are not operational until the engine
has been started, therefore you need
to apply much more force than usu-
al to the brake pedal and steering
wheel.

WARNING

STARTING PROCEDURE
FOR PETROL VERSIONS

Proceed as follows:
❒ ensure that the handbrake is on;
❒ put the gear lever into neutral;
❒ press the clutch pedal all the way down

without touching the accelerator;

❒ turn the ignition key to AVV and re-

lease it the moment the engine starts.

If the engine does not start at the first at-
tempt, return the ignition key to STOP
before repeating the starting procedure.

111-122 ACTUAL 2ed EN 30-04-2010 12:38 Pagina 112

Advertising