FIAT Grande Punto Actual - Manual (Page 121)

120
SAFETY
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
ST
AR
TING
AND DRIVING
Assembly diagram fig. 3
The tow hook structure must be fastened
at the points marked by Ø using a total
of 6 M10 screws.
The internal back plates should be at least
6 mm thick.
The hook should be fastened to the body
avoiding any type of drilling of the rear
bumper that remains visible when the
hook is removed.
IMPORTANT It is compulsory to attach
a label (plainly visible) of suitable size and
material at the same level as the hitch ball,
with the following wording:
MAX LOAD ON BALL 60 kg
After assembly, the screw
holes should be sealed to
prevent exhaust gases getting in.
WARNING
fig. 3 F0M0143m
Existing
hole
Existing
screw
Existing screw
Existing
hole
Existing
hole
Existing hole
Standard ball
Laden
111-122 ACTUAL 2ed EN 30-04-2010 12:38 Pagina 120