FIAT Grande Punto Actual - Manual (Page 26)

25
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
Setting date (Set Date)
Using this function it is possible to change
the date (day – month – year).
To update, proceed as follows:
– briefly press MENU ESC – “day” (dd)
will flash on the display;
– press + or – to set the value;
– briefly press MENU ESC – “month”
(mm) will flash on the display;
– press + or – to set the value;
– briefly press MENU ESC – “year”
(yyyy) will flash on the display;
– press + or – to make the adjustment.
NB The setting increases or decreases by
one unit each time + or – is pressed. Hold
the button down to increase/decrease the
setting rapidly. Complete the setting with
single presses of the button when you ap-
proach the required setting.
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
– press + or – to adjust the value;
– if selecting “Mode”, briefly press MENU
ESC – the mode will flash on the display;
– press + or – to select “24h” or “12h”.
When you have made the required ad-
justments, briefly press MENU ESC to
go back to the menu screen or hold the
button down to go back to the main menu
without saving.
– hold MENU ESC down to go back to
the standard screen or main menu, de-
pending on where you are in the menu. Initial page (display of information
on the main screen)
(for versions/markets, where provided)
This function allows you to choose the in-
formation you would like to see on the
main screen. You can choose to display the
date or the turbocharger boost pressure.
To make your choice, proceed as follows:
– briefly press MENU ESC – “Initial
page” will appear on the display;
– briefly press MENU ESC once again to
show the display options “Date” and “En-
gine info”;
– press + or – to select the information
you wish to see on the main page of the
display;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
When the key is turned to MAR and the
initial check stage is over, the display will
show the information selected via the “Ini-
tial page” menu function.
001-032 ACTUAL 2ed EN.qxd 30-04-2010 12:33 Pagina 25