FIAT Grande Punto Actual User Manual
Page 141
140
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
IN AN
EMERGENCY
❒ for versions with hub caps, remove the
cap after unscrewing the 3 fastening
bolts and finally unscrew the fourth bolt
L-fig. 5 and remove the wheel;
❒ make sure the contact surfaces be-
tween spare wheel and hub are clean
so that the fastening bolts will not come
loose;
❒ fit the spare wheel by inserting the first
bolt two threads into the hole closest
to the inflation valve;
❒ fit the hub cap by aligning the crescent
hole with the bolt you have fitted us-
ing the wrench;
❒ tighten the fastening bolts;
❒ turn the jack handle L-fig. 4 to lower
the car and remove the jack;
❒ use the wrench provided to fasten the
bolts completely in a criss-cross fash-
ion as per the order illustrated in fig. 6;
❒ if you are replacing an alloy wheel and
wish to store it temporarily in the spare
wheel compartment, you should posi-
tion it upside down.
REFITTING A STANDARD
WHEEL
Following the procedure described previ-
ously, raise the car and remove the spare
wheel.
fig. 5
F0M0192m
fig. 6
F0M0194m
135-166 ACTUAL 2ed EN 30-04-2010 12:39 Pagina 140